Back to search
Find a Tender
TENDER
Framework Active Goods
FW Supply & Deliver - 11kV Indoor Switchgear - Multi Site 0637
Published 23 Sep 2026
23 Sep 2026
- Primary CPV
-
31214500 *
Electric switchboards
- Location
- 🇬🇧 Perth & Kinross and Stirling, Scotland
- Value
- £105,000,000
- Contract
-
8 years Duration
01/07/2027 30/06/2035
- Contract Types
-
31 *Electrical machinery, equipment & lighti...Full CPV Breakdown
- SME suitable
- Not stated
Publisher Address
Inveralmond House, 200 Dunkeld Road, Perth, PH1 3AQ, United Kingdom · UKM77
Contact
Award Criteria
- Technical Ability and Capability
- Legal and Financial Capacity
- Health, Safety, Quality and Sustainability
- PQQ Toolbox · Bidding Documents
Related tenders
SCOTTISH HYDRO ELECTRIC POWER DISTRIBUTI...
All notices from this publisher Same CPV code
31214500 *
All notices with this CPV code
Reference: PQQ_519
Scottish Hydro Electric Power Distribution plc and Southern Electric Power Distribution plc (SSEN) intends to establish multi-supplier Framework Agreements for the design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed primary switchgear for use across the SSEN Distribution network.
The Framework will support asset replacement, network reinforcement, customer connections and strategic investment programmes throughout the remainder of ED2, ED3 and the early years of ED4. Current planning assumptions indicate forecast demand of approximately 2,600 switchgear panels over the anticipated Framework lifecycle, although these volumes are indicative only and no minimum volume or value of work is guaranteed.
The procurement is structured across four lots:
Lot 1: Conventional CT/VT Fixed-Pattern Switchgear
Lot 2: LPIT-Enabled Fixed-Pattern Switchgear
Lot 3: Conventional CT/VT Withdrawable Switchgear
Lot 4: LPIT-Enabled Withdrawable Switchgear
The Framework will support SSEN's wider switchgear standardisation strategy, intended to improve affordability, manufacturing efficiency, security of supply, supply-chain resilience, lead-time performance and whole-life asset value through increased standardisation and product rationalisation.
Fixed-pattern switchgear remains SSEN's preferred architecture and is expected to account for the majority of Framework demand. Dedicated withdrawable lots have been included to support specific project requirements and future network investment needs.
The scope may include, but is not limited to:
- 11kV indoor metal-enclosed primary switchgear;
- fixed-pattern and withdrawable switchgear assemblies;
- conventional CT/VT and LPIT-enabled instrument transformer solutions;
- protection and control interfaces;
- manufacturer testing and certification;
- technical support and engineering assistance;
- installation and commissioning support services;
- training, warranty and after-sales support;
- spare parts and lifecycle support; and
- associated software, firmware, cyber-security support and obsolescence management activities where applicable.
Applicants may apply for one, multiple or all lots. Framework appointments and subsequent call-off opportunities will be awarded in accordance with the procurement documents.
Full CPV breakdown
- 31214500 — Electric switchboards (primary)
Notice details
- Buyer type
- Utility
- Competition
- Restricted / competitive (suppliers are shortlisted first)
- Contract type
- Goods
- Lots
- 4
- Procurement method
- Competitive flexible procedure
- Main category
- Goods
- Above threshold
- Yes
- Legal basis
- UKPGA 2023/54
- Notice status
- Active
- Renewal
- The initial Framework term will be used until 30th June 2035 with the option of 2 x 1 year extension terms.
- Framework agreement
- Yes
- Framework details
- Suppliers will be appointed to the Framework following completion of the competitive procurement process described within the procurement documents. The Framework is anticipated to comprise four lots covering: • Lot 1 – Conventional CT/VT Fixed-Pattern Switchgear • Lot 2 – LPIT-Enabled Fixed-Pattern Switchgear • Lot 3 – Conventional CT/VT Withdrawable Switchgear • Lot 4 – LPIT-Enabled Withdrawable Switchgear Suppliers may apply for one, multiple or all lots. Framework appointments will be made separately for each lot. Framework awards will be made to the suppliers submitting the most advantageous tenders in accordance with the evaluation methodology detailed within the procurement documents. Public contracts may be awarded either directly or following a competitive selection process between the suppliers appointed to the relevant lot, in accordance with the Framework Agreement. Prices may be established through supplier framework pricing schedules, agreed pricing mechanisms, project-specific quotations and/or further competition, as detailed within the Invitation to Tender and Framework documentation. SSEN currently anticipates appointing multiple suppliers to each lot, although the final number of framework suppliers appointed to each lot will be determined through the procurement process and may vary by lot.
- Submission method
- All interested parties are welcome to view the Opportunity Listing in our Source to Contract System, Jaggaer. Under 'Current Opportunites' you will find all the details on how to register and be invited to the Pre Qualification Questionnaire in Jaggaer: https://sse.app.jaggaer.com/esop/guest/go/opportunity/detail?opportunityId=454 General Jaggaer Supplier Guide can be accessed here: https://www.sse.com/potential-suppliers and all questions can be sent to Racahel.Abercrombie@sse.com All PQQ responses must be submitted via Jaggaer, we will not accept email submissions.
- Enquiries close
- 26 Oct 2026
- Award decision expected
- 30 Apr 2027
- Reserved / special regime
- Utilities
- Number of lots
- 4
- Language
- EN
- Published
- 23 Sep 2026 10:01
- OCID
- ocds-h6vhtk-0776c1
- Notice ID
- PQQ_519
Lots (4)
Lot 1: Conventional CT/VT Fixed-Pattern Switchgear
£105,000,000
Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed fixed-pattern primary switchgear incorporating conventional current transformer (CT) and voltage transformer (VT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare p...
1 Jul 2027 to 30 Jun 2035 · Active
Lot 2: LPIT-Enabled Fixed-Pattern Switchgear
£105,000,000
Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed fixed-pattern primary switchgear incorporating low power instrument transformer (LPIT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts, lifecycle support and...
1 Jul 2027 to 30 Jun 2035 · Active
Lot 3: Conventional CT/VT Withdrawable Switchgear
£105,000,000
Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed withdrawable primary switchgear incorporating conventional current transformer (CT) and voltage transformer (VT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare pa...
1 Jul 2027 to 30 Jun 2035 · Active
Lot 4: LPIT-Enabled Withdrawable Switchgear
£105,000,000
Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed withdrawable primary switchgear incorporating low power instrument transformer (LPIT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts, lifecycle support and...
1 Jul 2027 to 30 Jun 2035 · Active
Full notice record
179 detailsEverything the publisher included in this notice, organised by section.
Organisations
| Party 1 › Name | SCOTTISH HYDRO ELECTRIC POWER DISTRIBUTION PLC |
| Party 1 › Address › Street | Inveralmond House, 200 Dunkeld Road |
| Party 1 › Address › Town / city | Perth |
| Party 1 › Address › Postcode | PH1 3AQ |
| Party 1 › Address › Country | GB |
| Party 1 › Address › Country | United Kingdom |
| Party 1 › Address › Region (NUTS) | UKM77 |
| Party 1 › Contact › Email | rachael.abercrombie@sse.com |
| Party 1 › Role | buyer |
| Party 1 › Link | http://www.ssen.co.uk |
| Party 1 › Classification › Description | Private utility |
| Party 2 › Name | SOUTHERN ELECTRIC POWER DISTRIBUTION PLC |
| Party 2 › Address › Street | No.1 Forbury Place, 43 Forbury Road |
| Party 2 › Address › Town / city | Reading |
| Party 2 › Address › Postcode | RG1 3JH |
| Party 2 › Address › Country | GB |
| Party 2 › Address › Country | United Kingdom |
| Party 2 › Address › Region (NUTS) | UKJ11 |
| Party 2 › Contact › Email | rachael.abercrombie@sse.com |
| Party 2 › Role | buyer |
| Party 2 › Link | http://www.ssen.co.uk |
| Party 2 › Classification › Description | Private utility |
Buyer
| Name | SCOTTISH HYDRO ELECTRIC POWER DISTRIBUTION PLC |
Tender
| Title | FW Supply & Deliver - 11kV Indoor Switchgear - Multi Site 0637 |
| Status | active |
| Item › Item 1 › CPV › CPV 1 › Description | Electric switchboards |
| Item › Item 1 › CPV › CPV 2 › Description | Switchgear |
| Item › Item 1 › CPV › CPV 3 › Description | Circuit breakers |
| Item › Item 1 › CPV › CPV 4 › Description | Electrical apparatus for switching or protecting electrical circuits |
| Item › Item 1 › Delivery › Region (NUTS) | UK |
| Item › Item 1 › Delivery › Country | GB |
| Item › Item 1 › Delivery › Country | United Kingdom |
| Item › Item 2 › CPV › CPV 1 › Description | Electric switchboards |
| Item › Item 2 › CPV › CPV 2 › Description | Switchgear |
| Item › Item 2 › CPV › CPV 3 › Description | Circuit breakers |
| Item › Item 2 › CPV › CPV 4 › Description | Electrical apparatus for switching or protecting electrical circuits |
| Item › Item 2 › Delivery › Region (NUTS) | UK |
| Item › Item 2 › Delivery › Country | GB |
| Item › Item 2 › Delivery › Country | United Kingdom |
| Item › Item 3 › CPV › CPV 1 › Description | Electric switchboards |
| Item › Item 3 › CPV › CPV 2 › Description | Switchgear |
| Item › Item 3 › CPV › CPV 3 › Description | Circuit breakers |
| Item › Item 3 › CPV › CPV 4 › Description | Electrical apparatus for switching or protecting electrical circuits |
| Item › Item 3 › Delivery › Region (NUTS) | UK |
| Item › Item 3 › Delivery › Country | GB |
| Item › Item 3 › Delivery › Country | United Kingdom |
| Item › Item 4 › CPV › CPV 1 › Description | Electric switchboards |
| Item › Item 4 › CPV › CPV 2 › Description | Switchgear |
| Item › Item 4 › CPV › CPV 3 › Description | Circuit breakers |
| Item › Item 4 › CPV › CPV 4 › Description | Electrical apparatus for switching or protecting electrical circuits |
| Item › Item 4 › Delivery › Region (NUTS) | UK |
| Item › Item 4 › Delivery › Country | GB |
| Item › Item 4 › Delivery › Country | United Kingdom |
| Value › Value incl. VAT | £126,000,000 |
| Value › Value | £105,000,000 |
| Value › Currency | GBP |
| Procedure type | selective |
| Procedure | Competitive flexible procedure |
| Procedure › Features | All interested parties are welcome to view the Opportunity Listing in our Source to Contract System, Jaggaer. Under 'Current Opportunites' you will find all the details on how to register and be invited to the Pre Qualification Questionnaire in Jaggaer: https://sse.app.jaggaer.com/esop/guest/go/opportunity/detail?opportunityId=454 All criteria for the PQQ are included in the link above and on registration to participate in the PQQ. All eligible suppliers will be invited to participate in the tender (ITT) where all relevant critera will be provided. |
| Category | goods |
| Special regime | utilities |
| Above threshold | Yes |
| Techniques › Framework agreement | Yes |
| Techniques › Framework agreement › Method | With and without reopening competition |
| Techniques › Framework agreement › Type | open |
| Techniques › Framework agreement › Buyer Categories | In addition to the establishing contracting authorities, the Framework may be available for use by other eligible SSE Group entities. The full list of participating entities and any conditions relating to Framework access will be detailed within the Invitation to Tender documentation and the resulting Framework Agreement. |
| How to submit | All interested parties are welcome to view the Opportunity Listing in our Source to Contract System, Jaggaer. Under 'Current Opportunites' you will find all the details on how to register and be invited to the Pre Qualification Questionnaire in Jaggaer: https://sse.app.jaggaer.com/esop/guest/go/opportunity/detail?opportunityId=454 General Jaggaer Supplier Guide can be accessed here: https://www.sse.com/potential-suppliers and all questions can be sent to Racahel.Abercrombie@sse.com All PQQ responses must be submitted via Jaggaer, we will not accept email submissions. |
| Submission Terms › Electronic submission | allowed |
| Submission Terms › Languages | en |
| Expression Of Interest Deadline | 2 Nov 2026 |
| Questions period › End | 26 Oct 2026 |
| Award decision period › End | 30 Apr 2027 |
| Lot › Lot 1 › Title | Conventional CT/VT Fixed-Pattern Switchgear |
| Lot › Lot 1 › Description | Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed fixed-pattern primary switchgear incorporating conventional current transformer (CT) and voltage transformer (VT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts and lifecycle support services. |
| Lot › Lot 1 › Status | active |
| Lot › Lot 1 › Value › Value incl. VAT | £126,000,000 |
| Lot › Lot 1 › Value › Value | £105,000,000 |
| Lot › Lot 1 › Value › Currency | GBP |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 1 › Type | quality |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 1 › Name | Technical Ability and Capability |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 1 › Description | Assessment of technical capability, product approval strategy, relevant experience, testing capability, support arrangements and other technical criteria as detailed within the procurement documents. |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 2 › Type | quality |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 2 › Name | Legal and Financial Capacity |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 2 › Description | Assessment of legal, financial and organisational capability in accordance with the Conditions of Participation detailed within the procurement documents. |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 3 › Type | quality |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 3 › Name | Health, Safety, Quality and Sustainability |
| Lot › Lot 1 › Award criteria › Criterion › Criterion 3 › Description | Assessment of management systems, policies, compliance arrangements and other requirements specified within the procurement documents. |
| Lot › Lot 1 › Selection Criteria › Criterion › Criterion 1 › Type | economic |
| Lot › Lot 1 › Selection Criteria › Criterion › Criterion 1 › Description | Applicants will be required to demonstrate appropriate economic and financial standing to perform the Framework obligations. This will include provision of financial information and supporting evidence as set out within the procurement documents. Applicants may also be required to provide information relating to insurance arrangements, although evidence of insurance cover will not be required prior to contract award. Equivalent information and evidence will be accepted where appropriate. |
| Lot › Lot 1 › Selection Criteria › Criterion › Criterion 2 › Type | technical |
| Lot › Lot 1 › Selection Criteria › Criterion › Criterion 2 › Description | Applicants will be required to demonstrate the technical ability and capability necessary to design, manufacture, test, supply and support 11kV indoor primary switchgear. Assessment may include evidence relating to relevant experience, manufacturing capability, testing capability, product approval status or approval strategy, UK support arrangements, quality management systems, health and safety management arrangements and associated technical resources. Equivalent standards, certifications and evidence will be accepted where appropriate. |
| Lot › Lot 1 › Contract period › Start | 1 Jul 2027 |
| Lot › Lot 1 › Contract period › End | 30 Jun 2035 |
| Lot › Lot 1 › Contract period › Can be extended to | 30 Jun 2037 |
| Lot › Lot 1 › Can be renewed | Yes |
| Lot › Lot 1 › Renewal › Description | The initial Framework term will be used until 30th June 2035 with the option of 2 x 1 year extension terms. |
| Lot › Lot 2 › Title | LPIT-Enabled Fixed-Pattern Switchgear |
| Lot › Lot 2 › Description | Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed fixed-pattern primary switchgear incorporating low power instrument transformer (LPIT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts, lifecycle support and activities associated with product approval and deployment. |
| Lot › Lot 2 › Status | active |
| Lot › Lot 2 › Value › Value incl. VAT | £126,000,000 |
| Lot › Lot 2 › Value › Value | £105,000,000 |
| Lot › Lot 2 › Value › Currency | GBP |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 1 › Type | quality |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 1 › Name | Technical Ability and Capability |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 1 › Description | Assessment of technical capability, product approval strategy, relevant experience, testing capability, support arrangements and other technical criteria as detailed within the procurement documents. |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 2 › Type | quality |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 2 › Name | Legal and Financial Capacity |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 2 › Description | Assessment of legal, financial and organisational capability in accordance with the Conditions of Participation detailed within the procurement documents. |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 3 › Type | quality |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 3 › Name | Health, Safety, Quality and Sustainability |
| Lot › Lot 2 › Award criteria › Criterion › Criterion 3 › Description | Assessment of management systems, policies, compliance arrangements and other requirements specified within the procurement documents. |
| Lot › Lot 2 › Selection Criteria › Criterion › Criterion 1 › Type | economic |
| Lot › Lot 2 › Selection Criteria › Criterion › Criterion 1 › Description | Applicants will be required to demonstrate appropriate economic and financial standing to perform the Framework obligations. This will include provision of financial information and supporting evidence as set out within the procurement documents. Applicants may also be required to provide information relating to insurance arrangements, although evidence of insurance cover will not be required prior to contract award. Equivalent information and evidence will be accepted where appropriate. |
| Lot › Lot 2 › Selection Criteria › Criterion › Criterion 2 › Type | technical |
| Lot › Lot 2 › Selection Criteria › Criterion › Criterion 2 › Description | Applicants will be required to demonstrate the technical ability and capability necessary to design, manufacture, test, supply and support 11kV indoor primary switchgear. Assessment may include evidence relating to relevant experience, manufacturing capability, testing capability, product approval status or approval strategy, UK support arrangements, quality management systems, health and safety management arrangements and associated technical resources. Equivalent standards, certifications and evidence will be accepted where appropriate. |
| Lot › Lot 2 › Contract period › Start | 1 Jul 2027 |
| Lot › Lot 2 › Contract period › End | 30 Jun 2035 |
| Lot › Lot 2 › Contract period › Can be extended to | 30 Jun 2037 |
| Lot › Lot 2 › Can be renewed | Yes |
| Lot › Lot 2 › Renewal › Description | The initial Framework term will be used until 30th June 2035 with the option of 2 x 1 year extension terms. |
| Lot › Lot 3 › Title | Conventional CT/VT Withdrawable Switchgear |
| Lot › Lot 3 › Description | Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed withdrawable primary switchgear incorporating conventional current transformer (CT) and voltage transformer (VT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts and lifecycle support services. |
| Lot › Lot 3 › Status | active |
| Lot › Lot 3 › Value › Value incl. VAT | £126,000,000 |
| Lot › Lot 3 › Value › Value | £105,000,000 |
| Lot › Lot 3 › Value › Currency | GBP |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 1 › Type | quality |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 1 › Name | Technical Ability and Capability |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 1 › Description | Assessment of technical capability, product approval strategy, relevant experience, testing capability, support arrangements and other technical criteria as detailed within the procurement documents. |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 2 › Type | quality |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 2 › Name | Legal and Financial Capacity |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 2 › Description | Assessment of legal, financial and organisational capability in accordance with the Conditions of Participation detailed within the procurement documents. |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 3 › Type | quality |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 3 › Name | Health, Safety, Quality and Sustainability |
| Lot › Lot 3 › Award criteria › Criterion › Criterion 3 › Description | Assessment of management systems, policies, compliance arrangements and other requirements specified within the procurement documents. |
| Lot › Lot 3 › Selection Criteria › Criterion › Criterion 1 › Type | economic |
| Lot › Lot 3 › Selection Criteria › Criterion › Criterion 1 › Description | Applicants will be required to demonstrate appropriate economic and financial standing to perform the Framework obligations. This will include provision of financial information and supporting evidence as set out within the procurement documents. Applicants may also be required to provide information relating to insurance arrangements, although evidence of insurance cover will not be required prior to contract award. Equivalent information and evidence will be accepted where appropriate. |
| Lot › Lot 3 › Selection Criteria › Criterion › Criterion 2 › Type | technical |
| Lot › Lot 3 › Selection Criteria › Criterion › Criterion 2 › Description | Applicants will be required to demonstrate the technical ability and capability necessary to design, manufacture, test, supply and support 11kV indoor primary switchgear. Assessment may include evidence relating to relevant experience, manufacturing capability, testing capability, product approval status or approval strategy, UK support arrangements, quality management systems, health and safety management arrangements and associated technical resources. Equivalent standards, certifications and evidence will be accepted where appropriate. |
| Lot › Lot 3 › Contract period › Start | 1 Jul 2027 |
| Lot › Lot 3 › Contract period › End | 30 Jun 2035 |
| Lot › Lot 3 › Contract period › Can be extended to | 30 Jun 2037 |
| Lot › Lot 3 › Can be renewed | Yes |
| Lot › Lot 3 › Renewal › Description | The initial Framework term will be used until 30th June 2035 with the option of 2 x 1 year extension terms. |
| Lot › Lot 4 › Title | LPIT-Enabled Withdrawable Switchgear |
| Lot › Lot 4 › Description | Design, manufacture, testing, supply and delivery of 11kV indoor metal-enclosed withdrawable primary switchgear incorporating low power instrument transformer (LPIT) technology. The scope may include associated equipment, technical support, testing, certification, training, warranty, spare parts, lifecycle support and activities associated with product approval and deployment. |
| Lot › Lot 4 › Status | active |
| Lot › Lot 4 › Value › Value incl. VAT | £126,000,000 |
| Lot › Lot 4 › Value › Value | £105,000,000 |
| Lot › Lot 4 › Value › Currency | GBP |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 1 › Type | quality |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 1 › Name | Technical Ability and Capability |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 1 › Description | Assessment of technical capability, product approval strategy, relevant experience, testing capability, support arrangements and other technical criteria as detailed within the procurement documents. |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 2 › Type | quality |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 2 › Name | Legal and Financial Capacity |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 2 › Description | Assessment of legal, financial and organisational capability in accordance with the Conditions of Participation detailed within the procurement documents. |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 3 › Type | quality |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 3 › Name | Health, Safety, Quality and Sustainability |
| Lot › Lot 4 › Award criteria › Criterion › Criterion 3 › Description | Assessment of management systems, policies, compliance arrangements and other requirements specified within the procurement documents. |
| Lot › Lot 4 › Selection Criteria › Criterion › Criterion 1 › Type | economic |
| Lot › Lot 4 › Selection Criteria › Criterion › Criterion 1 › Description | Applicants will be required to demonstrate appropriate economic and financial standing to perform the Framework obligations. This will include provision of financial information and supporting evidence as set out within the procurement documents. Applicants may also be required to provide information relating to insurance arrangements, although evidence of insurance cover will not be required prior to contract award. Equivalent information and evidence will be accepted where appropriate. |
| Lot › Lot 4 › Selection Criteria › Criterion › Criterion 2 › Type | technical |
| Lot › Lot 4 › Selection Criteria › Criterion › Criterion 2 › Description | Applicants will be required to demonstrate the technical ability and capability necessary to design, manufacture, test, supply and support 11kV indoor primary switchgear. Assessment may include evidence relating to relevant experience, manufacturing capability, testing capability, product approval status or approval strategy, UK support arrangements, quality management systems, health and safety management arrangements and associated technical resources. Equivalent standards, certifications and evidence will be accepted where appropriate. |
| Lot › Lot 4 › Contract period › Start | 1 Jul 2027 |
| Lot › Lot 4 › Contract period › End | 30 Jun 2035 |
| Lot › Lot 4 › Contract period › Can be extended to | 30 Jun 2037 |
| Lot › Lot 4 › Can be renewed | Yes |
| Lot › Lot 4 › Renewal › Description | The initial Framework term will be used until 30th June 2035 with the option of 2 x 1 year extension terms. |
| Document › Document 1 › Document type | Conflict of interest |
| Document › Document 1 › Description | Not published |
| Document › Document 2 › Document type | Bidding documents |
| Document › Document 2 › Access Details | Additional procurement documents will be issued to applicants who successfully satisfy the Conditions of Participation and are invited to participate in subsequent stages of the competitive flexible procedure. Such documents may include the Invitation to Tender, Framework Agreement, contract conditions, pricing schedules, detailed technical specifications, evaluation criteria, call-off procedures and associated supporting documentation. Documents will be made available electronically through the SSE Jaggaer eSourcing portal. |
| Document › Document 3 › Document type | Bidding documents |
| Document › Document 3 › Description | PQQ Toolbox |
| Document › Document 3 › Link | https://www.find-tender.service.gov.uk/Notice/Attachment/A-22735 |
| Document › Document 4 › Document type | Tender notice |
| Document › Document 4 › Description | Tender notice on Find a Tender |
| Document › Document 4 › Link | https://www.find-tender.service.gov.uk/Notice/089958-2026 |
| Document › Document 4 › Published | 23 Sep 2026 |