Updated hourly from UK government portals and TED (EU) WhatsApp contact@tendernotify.co.uk
Back to search Find a Tender
AWARD Framework Complete

Framework for Supply and Install of Fibre Optic Infrastructure Associated Works, Maintenance and Testing

Published Today
16 Nov 2026


Reference: 003551
Framework for Supply and Install of Fibre Optic Infrastructure Associated Works, Maintenance and Testing Works and Services under this framework will involve the following (please note the below list is not exhaustive and the Council reserves the right to add required works to call offs:  Installation of cat6 / cat6a copper data cabling either internally or externally. This will be terminated to either a patch panel in a network cabinet or a data outlet on a wall / ceiling.  Other termination points may be required occasionally. Data ports at both ends will be labelled and the cable run will be tested for spec using BIT error rate testing, with the results being provided by e-mail to an allocated officer before the Contractor leaves site if it is a repair or within 5 working days if it is a new installation.  Installation of fibre optic data cabling either internally or externally to a required building. This will usually be terminated to either a patch panel in a network cabinet using fibre splicing techniques or a data outlet on a wall / ceiling. Fibre ports at both ends will be labelled and the cable run will be tested using a TDR, with the results being provided by e-mail to the Councils designated Officer.  The above would be done in a number of locations including but not limited to:  Inspection pits outside, in all weathers.  Inside of a building from the network cabinet to numerous locations around the office.  Inside of a building from the network cabinet to network cabinet.  In the roof space of a building, often in cramped and confined spaces.  In hazardous locations such as on high roofs, on gantries high above swimming pools / halls, roadside etc.  Fitting of network cabinets, wall / floor trunking, galvanised steel cable trays and other associated cable management structures.  Swapping network cabinets after hours with larger units. This will involve carefully removing existing network kit and patch panels, removing the old network cabinet and disposing of it, re-fitting all the existing patch panels and networking kit into the new cabinet. Network connectivity will then need to be checked to ensure network is back online.  Remedial works such as patching walls, small amounts of plastering, repair fire stop sealants to the required standard following cabling.  Fitting of fused spurs to the mains electric to power the network cabinets.  Installation and configuration of point-to-point wireless equipment to provide network links wirelessly over distances between 1 - 25 miles. This will involve the installation of wireless radio's either on the roof of a building or a high gable end. Alignment of said radios to match with the partner radio at the other location. Running of external grade cat6 / cat6a cable from the network cabinet to the radio at either end.  The Contractor may be required to work at height and shall provide and use appropriate access equipment where necessary, including ladders, mobile elevated work platforms (MEWPs), cherry pickers, scissor lifts, or similar equipment. All work at height must be carried out in accordance with current health and safety legislation and best practice.  The Contractor must consider the potential presence of asbestos-containing materials (ACMs) within Durham County Council buildings. Prior to undertaking any works that could disturb the building fabric, the Contractor shall review relevant asbestos information provided by the Council and ensure that no asbestos-containing materials are damaged or disturbed during the installation, maintenance, or testing of fibre optic infrastructure. Any concerns regarding the presence of asbestos must be raised with the Council before works commence.  Some work will require the use of ladders, manlift, cherry picker, etc.  Have the necessary resource to undertake urgent repairs to either cat6 / fibre optic cabling at short notice (within 2 hours) and potentially out of hours / weekend within the same timescales)  Have the necessary resource to undertake works at short notice (1 - 2 weeks lead time).

Awarded to

Full CPV breakdown

  • 45000000 — Construction work (primary)

Notice details

Buyer type
Local authority
Competition
Direct award (no competition)
Contract type
Works
Winning supplier
SME
Procurement method
Below threshold - without competition
Main category
Works
Legal basis
UKPGA 2023/54
Notice status
Complete
Award status
Active
Framework agreement
Yes
Framework details
Direct award as only 1 contractor appointed
Language
EN
Published
16 Nov 2026 10:32
OCID
ocds-h6vhtk-07bc61
Notice ID
003551

Organisations on this notice

ACEDA Limited
Supplier SME
Tees House, 1st Floor, Trenchard Avenue, Thornaby, Stockton on Tees, TS17 0WQ, United Kingdom
in••••• Upgrade to Pro to see
GB-COH 04568494

Everything the publisher included in this notice, organised by section. Contact details hidden: upgrade to Pro to see

Organisations

Party 1 › Name Durham County Council
Party 1 › Address › Street Corten House, Dunholme Close
Party 1 › Address › Town / city Durham
Party 1 › Address › Postcode DH1 5WB
Party 1 › Address › Country GB
Party 1 › Address › Country United Kingdom
Party 1 › Address › Region (NUTS) UKC14
Party 1 › Role buyer
Party 1 › Link http://www.durham.gov.uk/
Party 1 › Classification › Description Public authority - sub-central government
Party 2 › Name ACEDA Limited
Party 2 › Address › Street Tees House, 1st Floor, Trenchard Avenue, Thornaby
Party 2 › Address › Town / city Stockton on Tees
Party 2 › Address › Postcode TS17 0WQ
Party 2 › Address › Country GB
Party 2 › Address › Country United Kingdom
Party 2 › Address › Region (NUTS) UKC11
Party 2 › Role supplier
Party 2 › Business size sme
Party 2 › VCSEs No

Buyer

Name Durham County Council

Tender

Title Framework for Supply and Install of Fibre Optic Infrastructure Associated Works, Maintenance and Testing
Status complete
Procedure type direct
Procedure Below threshold - without competition
Participation Fees › Type win
Participation Fees › Relative Value › Proportion 0.01
Participation Fees › Relative Value › Monetary Value award
Participation Fees › Description 1% rebate
Techniques › Framework agreement Yes
Techniques › Framework agreement › Method Without reopening competition
Techniques › Framework agreement › Type closed
Techniques › Framework agreement › Description Direct award as only 1 contractor appointed
Lot › Status complete

Awards

Status active
Category works
Supplier › Name ACEDA Limited
Item › CPV › Description Construction work
Item › Delivery › Region (NUTS) UKC
Item › Delivery › Country GB
Item › Delivery › Country United Kingdom

Contracts

Title Framework for the Supply and Install of Fibre Optic Infrastructure associated Works, Maintenance and Testing
Status active
Contract period › Start 1 Dec 2026
Contract period › End 30 Nov 2028
Contract period › Can be extended to 30 Nov 2030
Can be renewed Yes
Renewal › Description 2*12 months
Value › Value incl. VAT £720,000
Value › Value £600,000
Value › Currency GBP
Above threshold No
Signed 26 Oct 2026
Document › Document type Contract notice
Document › Description Contract details notice on Find a Tender
Document › Link https://www.find-tender.service.gov.uk/Notice/108338-2026
Document › Published 16 Nov 2026
Track this tender

Track this tender in your bid pipeline and set reminders.

See plans

Never miss a contract you could win

Search every UK public sector tender in one place, and get alerts the morning new ones appear.

Free to search No card needed Cancel any time
WhatsApp us